LoadBot by Parabellum Heavy Industries

Automated precision cartridge loading.

LoadBot stages up to 150 prepared cases and automates the repetitive charge-transfer workflow around proven precision scale and trickler systems. It monitors each run with machine state, scale data, and independent vision checks so the operator does not have to sit at the bench repeating the same operation case after case.

Join the Waitlist See How It Works

The System

LoadBot automates the work around precision powder dispensing.

LoadBot cartridge loading system — LoadBot SN1 - First prototype. This individual machine has surpassed 100k cases and is still running. That is over 600 lbs of H4350!

The scale and trickler produce the charge. LoadBot handles the staged cases, charge-transfer sequence, monitoring, and run record so large batches do not require constant manual repetition.

150-Case Capacity

Stage up to 150 prepared cartridge cases for a single loading run. LoadBot advances through the batch automatically while monitoring the process.

Precision Dispenser Integration

LoadBot is designed to work around established precision scale and trickler workflows instead of replacing them with a proprietary powder-metering system.

Machine Vision Verification

ACIS adds an independent observation layer. Scale data indicates charge weight; vision helps verify what physically happened during the loading process.

Fault Detection and Stop Behavior

When LoadBot detects an abnormal condition, the system is designed to stop and require attention rather than blindly continuing through the remaining cases.

Ladder

Ladder supports structured load-development sequences by allowing changing target charges across successive cases.

Run Reporting

LoadBot can retain session information and images associated with a run, making minimally attended loading easier to review afterward.

Included Equipment

LoadBot multi-axis powder handling robot
Short Action Customs powder funnel
User-selected caliber insert
Granite surface plate for the scale
Choice of .308/6.5, .223, or .338 bolt-face 150-round reloading tray

How It Works

Stage the brass, configure the run, then let LoadBot manage the repetition.

Stage

Load up to 150 prepared cases into LoadBot.

Configure

Set the target charge or configure a Ladder sequence for load development.

Dispense

The supported precision scale and trickler produce the requested charge.

Load

LoadBot handles the repeated charge-transfer and case-handling workflow across the staged cases.

Monitor

The system compares scale information, machine state, and vision observations as the run progresses.

Complete or Stop

LoadBot continues through the run when conditions look normal and stops when it detects a condition requiring attention.

Review

Session data and images can be retained in a run report for later inspection.

Optionally, a complete PDF report can be sent to your email.

ACIS Machine Vision

The scale verifies weight. Vision helps verify the process.

LoadBot ACIS touchscreen showing case inspection data

Precision loading normally depends on trusted scale data and careful operator attention. LoadBot adds ACIS, the Automatic Case Inspection System, as an independent observation layer around the automated loading sequence.

The camera system gives LoadBot additional information about what physically occurred during the run and supports after-run review through captured images and session reporting.

ACIS is not presented as a guarantee that every cartridge is correct. It is an additional monitoring layer intended to help detect abnormal conditions and stop the machine when attention is required.

All charges should be independently verified and inspected by the operator before installing projectiles.

Load Development

Ladder — automated load-development sequences.

For ladder testing, LoadBot can run a sequence of changing target charges across successive cases instead of requiring the operator to manually repeat the charge-transfer process for each test round. It is built for structured load development where charge weights change intentionally through the run.

Compatibility

Built around proven precision scale and trickler workflows.

LoadBot is being developed around equipment precision rifle reloaders already trust. Compatibility should be treated by validation status, not assumed broadly across every device in a product family.

Used extensively in development

A&D FX-120i / FX-123

A&D FX-200i

AutoTrickler V4

Currently in validation

SuperTrickler

Ingenuity trickler

Additional compatibility

Additional scale and trickler combinations may be evaluated as validation continues.

Validation Status

DVT is underway.

LoadBot is currently in DVT, Design Verification Test. Multiple units are running extended validation to prove that performance is repeatable across machines, not unique to a single prototype.

Reliability across long loading runs

Repeatability across multiple machines

Fault detection and stop behavior

ACIS vision performance

Assembly reproducibility

Run reporting and session review

Across current test machines, LoadBot has processed more than 250,000 cases in development testing.

Compatibility details

Availability

Join the LoadBot Waitlist

LoadBot is not yet generally available. Join the waitlist for production reservation updates as DVT units move through validation, beta tester distribution, and production readiness.